What do I need to pay attention to when operating a automatic glue dispensing machine?
Automatic dispensing machine in the operation of the following key matters need to pay attention to, in order to ensure operational safety, improve production efficiency and ensure the quality of dispensing:
1.Check before starting
Equipment cleanliness: check whether the automatic adhesive dispensing machine is clean, to ensure that there is no moisture, dust or other impurities, which may directly affect the normal operation of the machine.
Power supply and air circuit: Before moving the equipment, make sure that the air circuit and power supply have been cut off to avoid damage or safety accidents during the moving process.
Automatic In-line Glue Dispensing Machine SEC-DH400L
2.Safety matters during operation
Prohibit touching the movable parts: In the working condition, it is strictly prohibited to touch the dispensing head, needle nozzle, guide chain and other movable parts with hands to prevent pinching or machine failure.
Emergency stop: In case of special circumstances or emergencies, the red emergency button on the front of the machine should be pressed immediately to stop the machine immediately.
Personal protection: When working, the operator should wear gloves and try not to expose the skin to prevent glue from sticking to the skin. At the same time, it is recommended to wear work clothes to further protect personal safety.
Automated vacuum potting system SEC-S3030-B
3.The use of glue and equipment maintenance
Understand the characteristics of the glue: Before using the glue, you should have a full understanding of the glue, including its conditions of use, the correct method of use, etc., in order to ensure the quality of dispensing.
Cleaning the needle: complete the dispensing work or a long time in the middle of the dispensing work, the need to clean the needle in time, in order to prevent the needle from clogging, affecting the subsequent dispensing effect.
Safety performance testing: regular safety performance testing of In-line automatic glue dispensing machine, such as grounding resistance, etc., to ensure that the equipment does not leakage and other potential safety hazards.
4.Working environment and equipment management
Keep the operation space: don’t pile up too many items beside the machine so as not to affect the operation. At the same time, do not place unnecessary things on the workbench and keep it clean.
Power off equipment: In case of long time not using, the power should be cut off to prolong the life of the equipment and save the electricity cost.
5.Other Precautions
Air pressure setting: set the corresponding air pressure according to the viscosity of the glue to ensure the stability and accuracy of dispensing.
Programming and Parameter Setting: Prepare the programme according to the product dispensing graphic, and set the parameters such as dispensing speed, Z-axis raising height relative value, dispensing time, etc. to achieve accurate dispensing.
The operation of the automatic dispensing machine involves many aspects, which requires the operator to strictly comply with the operating procedures and safety precautions. Through careful preparation, standardised operation and timely maintenance, it can ensure the stable operation of the equipment and improve the quality of dispensing. If you have such questions, please contact Second Intelligent.
