● Melt tank capacity 30L
● New servo system for precise adhesive control
Can adjust with production line acceleration,
● deceleration, and multiple line breaks
● Matching metering gear pump
● Using non reflective holt melt adhesive
● Servo intelligent system control.
● The maximum power of the system is 10000w
Dimensions 1050*600*1250mm
He hot melt glue machine of the servo quantitative glue application system adopts a full
servo control system, which realizes the conversion and calculation of glue quantity.
According to the production line speed or other external signals, only the weight of the glue
used and the relevant parameters of the production line need to be input to meet high-precision
glue application. Accurate and stable control quantity.
6-30L Technical Parameters
| Cylinder capacity | 6L-12L/15-30L |
| Glue supply method | Gear pump glue supply |
| Heating output channel | 1-4 outputs |
| Temperature control range | 40-230°C (100-450°F) |
| Usage environment | 0-50°C Humidity 20-90% |
| Maximum dissolution speed | 6-12L/h, |
| Input voltage | AC380V/220V 50-60HZ |
| Maximum power | 6-12L: 3000W |
| 15-60L: 4000-5000W | |
| Dimensions | 6-12L: 800x380x460mm |
| 15-50L: 850x510x1300 |
The hot melt dispensing equipment be applied in the following fields:
1.Hygiene products：
such as diapers, sanitary napkins, and adult incontinence products.
2.Packaging industry:
including carton sealing, color boxes, paper bags, and label bonding.
3.Cosmetics industry:
such as lipstick packaging, perfume packaging, and gift box assembly.
4.Electronics industry
including PCBs, circuit boards, LEDs, and consumer electronics assembly.
5.Automotive and industrial manufacturing:
including automotive interior bonding, filter production, home appliance assembly, and new energy product manufacturing.
Our two-component In-line automated vacuum potting system machine is often used in the LED driver, power supply dispensing, with this encapsulated process, the product is heat dissipation, moisture-proof, waterproof, and flame retardant.
EMI and FIP dispensing techniques are widely use in the telecommunication and transportation industries. With the rapid development of communications, electric vehicles, and personal wireless electronic gadgets, these products are often required to connect and interact between each others. However, the signals sometimes interfere with the others, so need to be filtered or shielded. To improve and control the electromagnetic signals, engineers can redesign the entire product, or it can apply EMI shielding materials to filter or shield. Shielding is relatively economical and easy to achieve, it is done basically by adding shielding gasket. Our dispensing machine can directly produce different sizes of triangular shapes or D-shape filtering gaskets, these gaskets can appear in different shapes and is directly applying to the products. The dispensing machine equips with special adhesive material dispensing valve to apply directly, and without post-processing. The machine is intelligent, precise, but user-friendly, without complicated installation, or setup. In addition to the above functions, this type of dispenser equipment can also dispense FIP adhesive glue, and thermal interface material. The equipment is not only precise, but also multi-purpose, which is convenient for various type of storage battery, and electronic product applications.
Dispensing equipment are important for various EMS (electronic manufacturing service) productions. Electronic product processing service industry is indispensable to modern life, because many products are now equips with electronic and become more intelligent. These products are becoming more and more complex, precise and tiny in size. And for consumer product, their production volume also in large production and fast turnover. Therefore, it is necessary to use automated equipment, or even fully automated production lines to produce to meet apply the materials. With the automatic dispensing robots, it is possible to catch up with the capacity and demands. And more importantly, to improve economic efficiency to maximize economic of scale, and so to reduce unit prices to enhance competition. Very often in this type of production, the uses of dispensing machines or equipment is inseparable. In this production process, the glue dispenser is usually used to assist in the functions of fixing, connecting, protecting, dissipating heat and so on between parts and components. Our glue dispensers can directly add the relevant materials to the specified positions accurately and quickly as required.
Two-component materials’ encapsulating and casting production are important to enhance electronic products. No matter if your product is for business selling, or for household consuming, nowadays everyone has higher quality requirements and expectations. Furthermore, the protection of the product is not only to optimize the function of the product, but also to prolong the service life of the product, thereby reducing production waste. In electronic products the parts and components are generally composed of different metals and sensitive chemical combined materials. The more precise the product, the more high-tech the product it is, with this, it requires higher protection, so that it can be optimized according to the requirements. In doing so, it can state of long-term operation without being affected by the surrounding environmental conditions. Our two-component potting machines are specially designed for this production, as well as our vacuum encapsulating and casting potting machines. These machines can accurately degas the two-component adhesive materials base on the ratio, meter, mix, and homogenously and continually to the products. These materials cannot be applying manually, they need to use machines, which can be supplied in large quantities, continuously, accurately, and for long time of works. With the materials provided by such equipment, the product will have better protection, heat dissipation, waterproof, moisture-proof, encryption (to protect the circuitry design, and components used).
We are direct manufacturer.
Generally, we pack our goods with proper wooden box. However, if client has special requirment, we can customize.
Depends on terms and conditions, negotiable.
EXW, FOB,CIF…
Yes, we can produce according to the tested result. We can also product base on your design.
Yes, we will test 100% before delivery.
We keep good quality and competitive price to ensure our customers benefit. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Dispensing machine is an automatic machine and equipment that specializes in controlling fluid and dripping, coating, and potting the liquid on the surface of the product or inside the product. The glue dispenser is mainly used for glue and paint in the product process.
Glue dispensers are generally suitable for small products or electronic components, which are more precise; the products of potting dispensers are generally larger.
As long as it is a fluid with a viscosity within a certain range, it can be operated. The glue generally used in the dispenser includes red glue, hot melt glue, silica gel, grease and so on.
Yes. Dual-fluid models with 1:0.8~1:1.2 mixing ratio control are available.
0.1mm diameter with ultra-fine nozzles (requires low-viscosity fluids).
CE, UL, ISO 9001, and RoHS compliance for global markets.
Yes. Dual-fluid models with 1:0.8~1:1.2 mixing ratio control are available.
3C electronics, EV batteries, LED packaging, solar panels, and biomedical devices.
● Melt tank capacity 10L
● Up to 4 sets of rubber hose guns can be connected
● Precision metering gear pump
● Using non reflective holt melt adhesive
● The maximum power of the system is 3500w
● Dimensions 860*380*460mm
Optional configuration:
● Liquid level alarm-low liquid level induction and alarm prompt in the melting tank
● Reflux Control - Mechanical Reflux Valve or Pneumatic Reflux Valve
● Signal docking -linear tracking synthesis 0-10v, linear adjustment
● Appointment for power on/off-weekly optional timed start and stop equipment
Second Intelligent provides a full range of hot melt adhesive coating machine solutions. The SECOND system Hot melt glue dispensing machine adopts touch screen-human-machine interface full control operation, which is suitable for high-precision hot melt adhesive spraying applications. The motor drives the precision gear pump and the glue output automatic tracking system, and is equipped with precision gear pumps of different specifications to meet the production needs of users. It is widely used in spraying, coating, scraping and other methods.
PUR hot melt adhesive machine features:
1. Floor-standing design, dual motors, dual pumps, dual branch seats, independent and pre-assembled;
2. Horizontal pump body installation uses buffer connector to better calibrate the connection level;
3. New guide return valve, more accurate and stable adjustment.
4. Frame-type body structure, simple and fast installation and maintenance
5. Double-layer permeable Teflon coating in the melting cylinder, progressive large fin-shaped heating part, improve melting efficiency, save energy consumption, and effectively reduce carbonization.
Hot melt glue dispenser machine
Performance:
● Provides greater flexibility
● Alternating operations for higher productivity
● Powerful application expansion module for wider application
Material ref.:
UV glue, AB glue, EPOXY (black glue), white glue, EMI conductive glue, silicone, RTV, epoxy resin, instant glue, silver glue, red glue, solder paste, thermal paste, solder mask paste, clear paint, screw fixer, etc.
