Glue Potting Machine Operation Guide: How to use the glue potting machine
1.Preliminary preparation
Before using the glue potting machine, you need to make adequate preparations. First, ensure that the working environment is clean and safe to avoid dust and debris from interfering with the glue potting process. Secondly, check whether the power supply and air pressure of the glue potting machine are normal to ensure that the equipment is in good working condition. In addition, it is necessary to select the appropriate glue according to the requirements of the parts to be glued, and check whether the performance indicators such as the shelf life and viscosity of the glue meet the requirements.
Two component Vacuum Potting Machines SEC-S3030-C
2.Operation process
Start-up and debugging: Connect the power supply of the ab glue potting machine and turn on the equipment. According to the glue application requirements, adjust the various parameters of the equipment, such as glue application amount, glue application speed, glue application path, etc. At this time, you can first conduct a no-load test run to observe the operation of the equipment and ensure that there is no error before performing actual operation.
Gluing and preheating: Pour the prepared glue into the glue storage barrel of the glue potting machine, and be careful to avoid glue splashing or mixing with impurities. According to the characteristics of the glue, it may be necessary to preheat the equipment in advance to ensure that the glue maintains proper fluidity during the gluing process.
Part positioning and fixing: Place the small automotive parts to be glued on the workbench of the glue potting machine, and fix them with a clamp or positioning device to ensure that the parts will not move or deform during the gluing process.
Start gluing: Start the glue potting machine’s gluing program, and the equipment will apply glue according to the preset parameters. During the gluing process, it is necessary to pay close attention to the operating status and gluing effect of the equipment. If there is any abnormality, the machine should be stopped and checked in time.
Inspection and trimming: After the glue is applied, check the parts to ensure that the glue is applied evenly and without omissions. If necessary, use scrapers, sandpaper and other tools to trim the glued parts to achieve the desired appearance.
3. Precautions
Safe operation: When operating the glue potting machine, be sure to comply with the safety operating procedures and wear protective equipment such as gloves and masks to avoid irritation or damage to the skin and respiratory tract caused by glue.
Glue management: The selection, storage and use of glue must be carried out strictly in accordance with the instructions to avoid glue deterioration or waste. At the same time, pay attention to the shelf life of the glue, and expired glue must not be used.
Equipment maintenance: Clean, inspect and maintain the glue potting machine regularly to ensure that the equipment is in good working condition. If equipment failure or abnormality is found, it should be stopped in time and contact professionals for repair.
Environmental control: Keep the working environment clean and suitable temperature and humidity conditions to avoid dust, water vapor and other adverse effects on the glue application effect.
potting filling machine SEC-S8700-E
4. Maintenance
Maintenance of the glue potting machine is the key to ensure its long-term stable operation. In addition to daily cleaning and inspection, it is also necessary to regularly lubricate, tighten and replace the various parts of the equipment. At the same time, it is necessary to establish a complete equipment file to record the equipment’s operating status, maintenance records and other information in order to promptly discover and solve problems.
