What should you pay attention to when operating a automatic glue dispensing robot?
When operating the automatic dispensing machine, you need to pay attention to the following key points to ensure safe operation, improve production efficiency and ensure dispensing quality:
1. Check before starting
Equipment cleanliness: Check whether the automatic dispensing machine is clean and ensure that there is no moisture, dust or other impurities, which may directly affect the normal operation of the machine.
Power supply and gas circuit: Before moving the equipment, make sure that the gas circuit and power supply have been cut off to avoid damage or safety accidents during the movement.
2. Safety matters during operation
Do not touch moving parts: In the working state, it is strictly forbidden to touch the dispensing head, needle nozzle, guide chain and other moving parts with your hands to prevent pinching or machine failure.
Emergency stop: If a special situation or emergency occurs, the red emergency button in front of the machine body should be pressed immediately to stop the machine immediately.
Personal protection: During operation, the operator should wear gloves and try not to expose the skin to prevent glue from sticking to the skin. At the same time, it is recommended to wear work clothes to further protect personal safety.
smt automatic glue dispenser SEC-DH600L
3. Glue use and equipment maintenance
Understand the characteristics of glue: Before using glue, you should have a full understanding of the glue, including its use conditions, correct use methods, etc., to ensure the quality of dispensing.
Cleaning the needle: When the dispensing work is completed or the dispensing work is not performed for a long time, the needle needs to be cleaned in time to prevent the needle from being blocked and affecting the subsequent dispensing effect.
Safety performance testing: Regularly perform safety performance tests on the fully automatic dispensing machine, such as grounding resistance, to ensure that the equipment has no safety hazards such as leakage.
4. Working environment and equipment management
Maintaining operating space: Do not pile up too many items next to the machine to avoid affecting the operation. At the same time, do not place unnecessary things on the workbench and keep it clean.
Equipment power off: When not in use for a long time, the power supply should be cut off to extend the life of the equipment and save electricity.
5. Other precautions
Air pressure setting: Set the corresponding air pressure according to the viscosity of the glue to ensure the stability and accuracy of dispensing.
Programming and parameter setting: Prepare a program according to the product dispensing graphics, and set parameters such as dispensing speed, relative value of Z-axis height increase, dispensing time, etc. to achieve precise dispensing.
