What are the precautions for the Hot Melt Glue Dispensing Machine? Hot-melt glue dispenser uses the characteristics of solid-state hot-melt glue to heat into the molten state and then solidify when exposed to the cold surface of the air. When using hot melt adhesive dispensers, we must understand and master the various models of
How is the Automatic Glue Dispensing Machine applied in the chip packaging industry? With the continuous development of society, today's era is an era of informationization. Semiconductors and integrated circuits have become the theme of today's era. The direct impact on the mechanical properties of semiconductors and integrated circuits is
Industrial Glue Applicators works: Working principle: Compressed air is sent into the plastic bottle, and the glue is pressed into the feeding tube connected to the piston chamber. When the piston is in the upstroke, the piston chamber is filled with glue. When the piston pushes the glue dropping the needle down, The glue
In order to ensure that the dispensing operation is simpler and more accurate, the speed is high. The control system of the Automatic Glue Dispensing Machine is equipped with a motion control card, an offline conversion board, a handheld teaching box, a serial cable, an interface cable, a software dog,
Glue Dispensing Machine, also known as glue applicator, glue dispenser, glue dispenser, glue dispenser, etc., specifically controls the fluid. The automatic machine that drips and applies fluid to the product surface or inside the product can realize three-dimensional and four-dimensional path dispensing, precise positioning, precise control of glue, no drawing, no leaking, no dripping.
The most common problem encountered by the Automatic Glue Dispensing Machine is the valve problem. The following are effective methods to solve the problems that often occur when the valve is used. Valve dripping, this situation often occurs after the valve is closed. 95% of this
